Dining & Meeting Tables
Protective glass over an existing table or a thicker glass surface supported by a suitable base or frame.
Made-to-Measure Furniture Glass · Dubai & UAE
Table Top Glass in Dubai
Custom-cut glass for dining tables, coffee tables, desks, counters and other furniture surfaces, prepared to the required size, shape and edge finish.
- Custom sizes & shapes
- Polished edge options
- Tempered glass where required
Made To Measure
Glass prepared around the furniture you already have
Table top glass can protect an existing furniture surface or form the visible table surface itself. The correct specification depends on how the glass is supported, the overall size and how the furniture will be used.
Simple rectangles and circles can be prepared from confirmed dimensions. Irregular shapes, unusual corners and existing furniture profiles may need a physical template before fabrication.
Coffee & Side Tables
Custom glass for smaller furniture, including round, oval, rectangular and other made-to-measure shapes.
Desks & Counters
Glass surfaces for desks, reception counters and work areas, with cut-outs where the final specification allows them.
Replacement Glass
Replacement pieces can be prepared to match an existing furniture opening, subject to measurement and edge requirements.
Thickness Guide
Thickness depends on support, size and use
These ranges are useful starting points. Final thickness and safety requirements should be confirmed after reviewing the furniture, span, support and dimensions.
| Typical use | Starting range | Tempering | What changes the choice |
|---|---|---|---|
| Protective top over solid furniture | 4–6 mm | Project dependent | The furniture supports the glass across most of its surface. |
| Coffee or side table surface | 8–10 mm | Often recommended | Panel size, support points, edge exposure and daily use. |
| Dining or meeting table surface | 10–12 mm | Commonly specified | Longer spans, seating height, base design and unsupported edges. |
| Glass surface supported mainly by a base | 12 mm+ | Usually required | Overall size, overhang, base footprint and structural support. |
| Desk or counter protector | 6–10 mm | Project dependent | Whether the glass protects a solid surface or spans between supports. |
Cut-outs, holes and edge details must be confirmed before tempering because tempered glass cannot be cut or drilled afterwards.
Custom Options
Shape, edge and appearance are chosen around the table
The final specification can be adjusted to suit the furniture design and the way the glass will be used.
Project Gallery
Table top glass projects
Existing Blue Lake table top glass project images. Tap any image to view it larger.
How It Works
From dimensions to finished glass
- 01
Share the table
Send a photo, approximate dimensions and explain whether the glass protects an existing top or forms the table surface.
- 02
Confirm measurements
Simple shapes can be confirmed from dimensions. Irregular furniture may require a site measurement or physical template.
- 03
Confirm specification
Thickness, shape, edge finish, holes and tempering requirements are agreed before fabrication.
- 04
Delivery & fitting
The finished glass is delivered and positioned at the project location according to the agreed scope.
Service Areas
Custom table top glass across Dubai & the UAE
Made-to-measure furniture glass can be arranged for residential and commercial projects across the UAE depending on project scope.
- Dubai
- Sharjah
- Abu Dhabi
- Ajman
- Ras Al Khaimah
- Fujairah
- Umm Al Quwain
- Al Ain
FAQ
Table top glass questions
What thickness should I use for table top glass?
It depends on the size, support and use of the glass. Thin glass can be suitable as a protective layer over solid furniture, while a glass surface spanning across a base or frame normally needs a thicker specification.
Can you make glass for an irregular or antique table?
Yes. For unusual outlines, handmade furniture or profiles that are difficult to measure accurately, a physical template or site measurement may be used before fabrication.
Can the corners and edges be rounded?
Yes. Corner shape and edge finish can be selected according to the table design, glass thickness and intended use.
Can holes or cut-outs be added to the glass?
Yes, where the glass specification allows it. Holes, notches and cut-outs need to be positioned before tempering because tempered glass cannot be cut or drilled afterwards.
Do you provide tempered table top glass?
Yes. Tempered glass can be specified where the table design, span, exposed edges or intended use require a safety glass solution.
Do you provide table top glass outside Dubai?
Yes. Projects can be arranged across the UAE depending on the project scope, dimensions and location.
Need custom glass for a table or desk?
Send a photo and approximate dimensions so the required shape, thickness and edge finish can be discussed.